Facts

Contact

With the Blinking Smart Stop installed, when you apply your brakes, it causes your center high mounted third brake light to automatically emit a visual alerting signal by flashing the light approximately 6 times, before entering the steady-state on red light condition.

Blinking Smart Stop with Delay

 The Blinking Smart Stop Delay is the same as the standard unit but with a  "Delay-Repeat" circuit built in, Delay version was specially designed for those drivers who might not want to continuously flash their third brake light, when caught in bumper to bumper traffic.  Once you have applied your brakes for the first time causing your third brake light to flash and then turn solid, touching your brakes again within 8 seconds will cause your third brake light to turn on normally without flashing.  In other words, you must have your foot off the brakes for more than 8 seconds before the Blinking Smart Stop will reset and cause your third brake light to flash again.

Both the universal "Standard" and "Delay" versions of the Blinking Smart Stop lets you maximize your Third Brake Light Effectiveness.  

This compact State-of-the-Art solid-state electronic module converts your ordinary center brake light into an attention getting visual aid alerting device when you are braking. 

These sequences have been selected because of their ability to gain and retain a following driver's attention.

Blinking Smart Stop Plus 

Blinking Smart Stop Plus is a  safety device to catch the attention of the driver behind you. Applying your brakes will cause your existing R/L main brake lights to blink rapidly 5 times and then stay on solid, as long as you have your foot on the brake pedal. Works with all  vehicles that have separate brake lights connections.

Emergency vehicles use flashing lights at all times because it gets attention from other road users. So why not use the Blinking Smart Stop  to grab the attention of following drivers, and reduce your risk of being hit in a rear-end collision?

Key Benefits

• A great aid from the elements, when a following driver's vision is impaired by fog, rain, snow, or darkness.

• Saves money by preventing potential rear end collisions resulting in lower insurance claims, which leads to lower premiums.

• These modules are designed to enhance an automobiles brake lights.

• Standard & Delay versions will work with any third brake lights including LED lights/bars.

• Plus version will work with all vehicles that have separate rear brake and indicator lights.

• Blinking Smart Stop only works when the driver applies the brakes.

• A very simple Do-It-Yourself Installation. Difficulty Rating 2 out of 10

Specifications

• Operating Voltage:  12 Volts DC

• Size:  1" x 2" x 0.75" (26mm x 51mm x 19mm) Blinking Smart Stop Standard and Delay Version.

• Wire Lengths:  12" (0.3m) Standard and Delay Version.

• Size:  2" x 2" x 0.75" (51mm x 51mm x 19mm) Blinking Smart Stop Plus.

• Wire Lengths:  24" (0.7m) + 1 x Blue wire 48" (1.2m)  Smart Stop Plus.

• Operating Temp:  -30ºC to +70ºC.

• Max Power Consumption:  1W.

What Your Order Includes

• A 100% operationally tested Blinking Smart Stop Third Brake Light Module.

• Three/Four Quick Splice Connectors. (depending on the unit)

• Complete Installation Instructions.

• Quick delivery within 5-7 days.

• Emailed receipt and customer support.

• 15 Day Risk Free, Money Back Guarantee. (less S & H).

Back to Top